Writing Programs

วิธี transfer SOL in a program

Solana Program ของเราสามารถส่ง lamports จาก account นึงไปอีก account นึงโดยไม่ต้อง 'ร้องขอ' (invoking) ไปที่ System program. โดยหลักเบื้องต้นก็คือ program ของเราสามารถส่ง lamports จาก account ที่ program ของเรา เป็นเจ้าของ ไปที่ account ไหนก็ได้

account ของคนรับ ไม่จำเป็นต้อง เป็น account ที่ program ของเราเป็นเจ้าของ

/// Transfers lamports from one account (must be program owned)
/// to another account. The recipient can by any account
fn transfer_service_fee_lamports(
    from_account: &AccountInfo,
    to_account: &AccountInfo,
    amount_of_lamports: u64,
) -> ProgramResult {
    // Does the from account have enough lamports to transfer?
    if **from_account.try_borrow_lamports()? < amount_of_lamports {
        return Err(CustomError::InsufficientFundsForTransaction.into());
    }
    // Debit from_account and credit to_account
    **from_account.try_borrow_mut_lamports()? -= amount_of_lamports;
    **to_account.try_borrow_mut_lamports()? += amount_of_lamports;
    Ok(())
}

/// Primary function handler associated with instruction sent
/// to your program
fn instruction_handler(accounts: &[AccountInfo]) -> ProgramResult {
    // Get the 'from' and 'to' accounts
    let account_info_iter = &mut accounts.iter();
    let from_account = next_account_info(account_info_iter)?;
    let to_service_account = next_account_info(account_info_iter)?;

    // Extract a service 'fee' of 5 lamports for performing this instruction
    transfer_service_fee_lamports(from_account, to_service_account, 5u64)?;

    // Perform the primary instruction
    // ... etc.

    Ok(())
}

วิธีใช้นาฬิกา (clock) ใน program

การใช้งาน clock สามารถทำได้ 2 แบบ

  1. ส่ง SYSVAR_CLOCK_PUBKEY ไปใน instruction
  2. เรียกใช้ Clock โดยตรงข้างใน instruction

เราควรจะรู้จักทั้ง 2 methods เพราะใน program เก่าๆ (legacy programs) ยังคงคาดหมายว่า SYSVAR_CLOCK_PUBKEY จะเป็น account

ส่ง Clock ในแบบ account ภายใน instruction

มาลองสร้าง instruction ด้วย account ที่ได้รับมาสำหรับ initializing และ sysvar pubkey

Press </> button to view full source
use borsh::{BorshDeserialize, BorshSerialize};
use solana_program::{
    account_info::{next_account_info, AccountInfo},
    clock::Clock,
    entrypoint,
    entrypoint::ProgramResult,
    msg,
    pubkey::Pubkey,
    sysvar::Sysvar,
};

entrypoint!(process_instruction);

#[derive(BorshSerialize, BorshDeserialize, Debug)]
pub struct HelloState {
    is_initialized: bool,
}

// Accounts required
/// 1. [signer, writable] Payer
/// 2. [writable] Hello state account
/// 3. [] Clock sys var
pub fn process_instruction(
    _program_id: &Pubkey,
    accounts: &[AccountInfo],
    _instruction_data: &[u8],
) -> ProgramResult {
    let accounts_iter = &mut accounts.iter();
    // Payer account
    let _payer_account = next_account_info(accounts_iter)?;
    // Hello state account
    let hello_state_account = next_account_info(accounts_iter)?;
    // Clock sysvar
    let sysvar_clock_pubkey = next_account_info(accounts_iter)?;

    let mut hello_state = HelloState::try_from_slice(&hello_state_account.data.borrow())?;
    hello_state.is_initialized = true;
    hello_state.serialize(&mut &mut hello_state_account.data.borrow_mut()[..])?;
    msg!("Account initialized :)");

    // Type casting [AccountInfo] to [Clock]
    let clock = Clock::from_account_info(&sysvar_clock_pubkey)?;
    // Getting timestamp
    let current_timestamp = clock.unix_timestamp;
    msg!("Current Timestamp: {}", current_timestamp);

    Ok(())
}

แล้วก็ลองส่ง clock's sysvar public address ด้วย client

Press </> button to view full source
import {
  clusterApiUrl,
  Connection,
  Keypair,
  LAMPORTS_PER_SOL,
  PublicKey,
  SystemProgram,
  SYSVAR_CLOCK_PUBKEY,
  Transaction,
  TransactionInstruction,
} from "@solana/web3.js";

(async () => {
  const programId = new PublicKey(
    "77ezihTV6mTh2Uf3ggwbYF2NyGJJ5HHah1GrdowWJVD3"
  );

  const connection = new Connection(clusterApiUrl("devnet"), "confirmed");

  // Airdropping 1 SOL
  const feePayer = Keypair.generate();
  await connection.confirmTransaction(
    await connection.requestAirdrop(feePayer.publicKey, LAMPORTS_PER_SOL)
  );

  // Hello state account
  const helloAccount = Keypair.generate();

  const accountSpace = 1; // because there exists just one boolean variable
  const rentRequired = await connection.getMinimumBalanceForRentExemption(
    accountSpace
  );

  // Allocating space for hello state account
  const allocateHelloAccountIx = SystemProgram.createAccount({
    fromPubkey: feePayer.publicKey,
    lamports: rentRequired,
    newAccountPubkey: helloAccount.publicKey,
    programId: programId,
    space: accountSpace,
  });

  // Passing Clock Sys Var
  const passClockIx = new TransactionInstruction({
    programId: programId,
    keys: [
      {
        isSigner: true,
        isWritable: true,
        pubkey: feePayer.publicKey,
      },
      {
        isSigner: false,
        isWritable: true,
        pubkey: helloAccount.publicKey,
      },
      {
        isSigner: false,
        isWritable: false,
        pubkey: SYSVAR_CLOCK_PUBKEY,
      },
    ],
  });

  const transaction = new Transaction();
  transaction.add(allocateHelloAccountIx, passClockIx);

  const txHash = await connection.sendTransaction(transaction, [
    feePayer,
    helloAccount,
  ]);

  console.log(`Transaction succeeded. TxHash: ${txHash}`);
})();

ใช้ Clock โดยตรงใน instruction

สร้าง instruction ที่เหมือนกันโดยไม่คาดหวัง SYSVAR_CLOCK_PUBKEY จากฝั่ง client

Press </> button to view full source
use borsh::{BorshDeserialize, BorshSerialize};
use solana_program::{
    account_info::{next_account_info, AccountInfo},
    clock::Clock,
    entrypoint,
    entrypoint::ProgramResult,
    msg,
    pubkey::Pubkey,
    sysvar::Sysvar,
};

entrypoint!(process_instruction);

#[derive(BorshSerialize, BorshDeserialize, Debug)]
pub struct HelloState {
    is_initialized: bool,
}

// Accounts required
/// 1. [signer, writable] Payer
/// 2. [writable] Hello state account
pub fn process_instruction(
    _program_id: &Pubkey,
    accounts: &[AccountInfo],
    _instruction_data: &[u8],
) -> ProgramResult {
    let accounts_iter = &mut accounts.iter();
    // Payer account
    let _payer_account = next_account_info(accounts_iter)?;
    // Hello state account
    let hello_state_account = next_account_info(accounts_iter)?;

    // Getting clock directly
    let clock = Clock::get()?;

    let mut hello_state = HelloState::try_from_slice(&hello_state_account.data.borrow())?;
    hello_state.is_initialized = true;
    hello_state.serialize(&mut &mut hello_state_account.data.borrow_mut()[..])?;
    msg!("Account initialized :)");

    // Getting timestamp
    let current_timestamp = clock.unix_timestamp;
    msg!("Current Timestamp: {}", current_timestamp);

    Ok(())
}

instruction ฝั่ง client จะเหลือส่งมาเฉพาะ state และ payer accounts.

Press </> button to view full source
import {
  clusterApiUrl,
  Connection,
  Keypair,
  LAMPORTS_PER_SOL,
  PublicKey,
  SystemProgram,
  Transaction,
  TransactionInstruction,
} from "@solana/web3.js";

(async () => {
  const programId = new PublicKey(
    "4ZEdbCtb5UyCSiAMHV5eSHfyjq3QwbG3yXb6oHD7RYjk"
  );

  const connection = new Connection(clusterApiUrl("devnet"), "confirmed");

  // Airdropping 1 SOL
  const feePayer = Keypair.generate();
  await connection.confirmTransaction(
    await connection.requestAirdrop(feePayer.publicKey, LAMPORTS_PER_SOL)
  );

  // Hello state account
  const helloAccount = Keypair.generate();

  const accountSpace = 1; // because there exists just one boolean variable
  const rentRequired = await connection.getMinimumBalanceForRentExemption(
    accountSpace
  );

  // Allocating space for hello state account
  const allocateHelloAccountIx = SystemProgram.createAccount({
    fromPubkey: feePayer.publicKey,
    lamports: rentRequired,
    newAccountPubkey: helloAccount.publicKey,
    programId: programId,
    space: accountSpace,
  });

  const initIx = new TransactionInstruction({
    programId: programId,
    keys: [
      {
        isSigner: true,
        isWritable: true,
        pubkey: feePayer.publicKey,
      },
      {
        isSigner: false,
        isWritable: true,
        pubkey: helloAccount.publicKey,
      },
    ],
  });

  const transaction = new Transaction();
  transaction.add(allocateHelloAccountIx, initIx);

  const txHash = await connection.sendTransaction(transaction, [
    feePayer,
    helloAccount,
  ]);

  console.log(`Transaction succeeded. TxHash: ${txHash}`);
})();

วิธีเปลี่ยน account size

เราสามารถเปลี่ยนขนาดของ account ที่ program เป็นเจ้าของ ได้ด้วย realloc. realloc สามารถเปลี่ยนขนาดของ accountได้ถึง 10KB เมื่อเราใช้ realloc มาขยายขนาดของ account อย่าลืมว่าเราต้องส่ง lamports ไปด้วยเพื่อ account นั้นไม่ถูกเก็บค่าเช่า (rent-exempt)

Press </> button to view full source
use {
  crate::{
      instruction::WhitelistInstruction,
      state::WhiteListData,
  },
  borsh::{BorshDeserialize, BorshSerialize},
  solana_program::{
      account_info::{next_account_info, AccountInfo},
      entrypoint::ProgramResult,
      msg,
      program::invoke_signed,
      program::invoke,
      program_error::ProgramError,
      pubkey::Pubkey,
      sysvar::Sysvar,
      sysvar::rent::Rent,
      system_instruction,
  },
  std::convert::TryInto,
};

pub fn process_instruction(
  _program_id: &Pubkey,
  accounts: &[AccountInfo],
  input: &[u8],
) -> ProgramResult {
  // Length = BOOL + VEC + Pubkey * n (n = number of keys)
  const INITIAL_ACCOUNT_LEN: usize = 1 + 4 + 0 ;
  msg!("input: {:?}", input);

  let instruction = WhitelistInstruction::try_from_slice(input)?;

  let accounts_iter = &mut accounts.iter();

  let funding_account = next_account_info(accounts_iter)?;
  let pda_account = next_account_info(accounts_iter)?;
  let system_program = next_account_info(accounts_iter)?;

  match instruction {
    WhitelistInstruction::Initialize => {
      msg!("Initialize");

      let (pda, pda_bump) = Pubkey::find_program_address(
          &[
            b"customaddress",
            &funding_account.key.to_bytes(),
          ],
          _program_id,
      );

      let signers_seeds: &[&[u8]; 3] = &[
          b"customaddress",
          &funding_account.key.to_bytes(),
          &[pda_bump],
      ];
      
      if pda.ne(&pda_account.key) {
          return Err(ProgramError::InvalidAccountData);
      }

      let lamports_required = Rent::get()?.minimum_balance(INITIAL_ACCOUNT_LEN);
      let create_pda_account_ix = system_instruction::create_account(
          &funding_account.key,
          &pda_account.key,
          lamports_required,
          INITIAL_ACCOUNT_LEN.try_into().unwrap(),
          &_program_id,
      );

      invoke_signed(
          &create_pda_account_ix,
          &[
              funding_account.clone(),
              pda_account.clone(),
              system_program.clone(),
          ],
          &[signers_seeds],
      )?;
      
      let mut pda_account_state = WhiteListData::try_from_slice(&pda_account.data.borrow())?;

      pda_account_state.is_initialized = true;
      pda_account_state.white_list = Vec::new();
      pda_account_state.serialize(&mut &mut pda_account.data.borrow_mut()[..])?;
      Ok(())
    }
    WhitelistInstruction::AddKey { key } => {
      msg!("AddKey");

      let mut pda_account_state = WhiteListData::try_from_slice(&pda_account.data.borrow())?;
      
      if !pda_account_state.is_initialized {
          return Err(ProgramError::InvalidAccountData);
      }

      let new_size = pda_account.data.borrow().len() + 32;

      let rent = Rent::get()?;
      let new_minimum_balance = rent.minimum_balance(new_size);
      
      let lamports_diff = new_minimum_balance.saturating_sub(pda_account.lamports());
      invoke(
          &system_instruction::transfer(funding_account.key, pda_account.key, lamports_diff),
          &[
              funding_account.clone(),
              pda_account.clone(),
              system_program.clone(),
          ],
      )?;

      pda_account.realloc(new_size, false)?;

      pda_account_state.white_list.push(key);
      pda_account_state.serialize(&mut &mut pda_account.data.borrow_mut()[..])?;

      Ok(())
    }
  }
}

วิธีทำ Cross Program Invocation

การใช้ cross program invocation คือการเรียก program's instruction ใน program ของเรา ตัวอย่างที่ดีคือ คำสั่ง swap ของ Uniswap ใน UniswapV2Router contract จะเรียกใช้ logic ที่จำเป็นในการ swap และเรียก ERC20 contract's transfer function เพื่อ swap จากคนนึงไปอีกคนนึง ในทางเดียวกันเราสามารถเรียก program's instruction เพื่อทำอะไรได้หลายอย่างตามที่ต้องการ

เรามาลองดูตัวอย่างแรกซึ่งก็คือ SPL Token Program's transfer instruction. สิ่งที่ต้องเตรียมสำหรับ accounts ที่เราต้องการจะให้มีก่ีส่งก็คือ

  1. Token Account ต้นทาง (account ที่ถือ tokens เราอยู่)
  2. Token Account ปลายทาง (account จะส่ง tokens ให้)
  3. Token Account เจ้าของ account ต้นทาง (wallet address ของเราที่เอาไว้ sign)
Press </> button to view full source
use solana_program::{
    account_info::{next_account_info, AccountInfo},
    entrypoint,
    entrypoint::ProgramResult,
    msg,
    program::invoke,
    program_error::ProgramError,
    pubkey::Pubkey,
};
use spl_token::instruction::transfer;

entrypoint!(process_instruction);

// Accounts required
/// 1. [writable] Source Token Account
/// 2. [writable] Destination Token Account
/// 3. [signer] Source Token Account holder's PubKey
/// 4. [] Token Program
pub fn process_instruction(
    _program_id: &Pubkey,
    accounts: &[AccountInfo],
    instruction_data: &[u8],
) -> ProgramResult {
    let accounts_iter = &mut accounts.iter();

    // Accounts required for token transfer

    // 1. Token account we hold
    let source_token_account = next_account_info(accounts_iter)?;
    // 2. Token account to send to
    let destination_token_account = next_account_info(accounts_iter)?;
    // 3. Our wallet address
    let source_token_account_holder = next_account_info(accounts_iter)?;
    // 4. Token Program
    let token_program = next_account_info(accounts_iter)?;

    // Parsing the token transfer amount from instruction data
    // a. Getting the 0th to 8th index of the u8 byte array
    // b. Converting the obtained non zero u8 to a proper u8 (as little endian integers)
    // c. Converting the little endian integers to a u64 number
    let token_transfer_amount = instruction_data
        .get(..8)
        .and_then(|slice| slice.try_into().ok())
        .map(u64::from_le_bytes)
        .ok_or(ProgramError::InvalidAccountData)?;

    msg!(
        "Transferring {} tokens from {} to {}",
        token_transfer_amount,
        source_token_account.key.to_string(),
        destination_token_account.key.to_string()
    );

    // Creating a new TransactionInstruction
    /*
        Internal representation of the instruction's return value (Result<Instruction, ProgramError>)

        Ok(Instruction {
            program_id: *token_program_id, // PASSED FROM USER
            accounts,
            data,
        })
    */

    let transfer_tokens_instruction = transfer(
        &token_program.key,
        &source_token_account.key,
        &destination_token_account.key,
        &source_token_account_holder.key,
        &[&source_token_account_holder.key],
        token_transfer_amount,
    )?;

    let required_accounts_for_transfer = [
        source_token_account.clone(),
        destination_token_account.clone(),
        source_token_account_holder.clone(),
    ];

    // Passing the TransactionInstruction to send
    invoke(
        &transfer_tokens_instruction,
        &required_accounts_for_transfer,
    )?;

    msg!("Transfer successful");

    Ok(())
}

client instruction อื่นๆ ที่เกี่ยวข้องจะอยู่ด้านล่าง ถ้าอยากทำความเข้าใจเรื่อง mint และการสร้าง token instructions ให้ลองดู code แบบเต็มใกล้ๆ กัน

Press </> button to view full source
import {
  clusterApiUrl,
  Connection,
  Keypair,
  LAMPORTS_PER_SOL,
  PublicKey,
  SystemProgram,
  Transaction,
  TransactionInstruction,
} from "@solana/web3.js";
import {
  AccountLayout,
  MintLayout,
  Token,
  TOKEN_PROGRAM_ID,
  u64,
} from "@solana/spl-token";

import * as BN from "bn.js";

// Users
const PAYER_KEYPAIR = Keypair.generate();
const RECEIVER_PUBKEY = Keypair.generate().publicKey;

// Mint and token accounts
const TOKEN_MINT_ACCOUNT = Keypair.generate();
const SOURCE_TOKEN_ACCOUNT = Keypair.generate();
const DESTINATION_TOKEN_ACCOUNT = Keypair.generate();

// Numbers
const DEFAULT_DECIMALS_COUNT = 9;
const TOKEN_TRANSFER_AMOUNT = 50 * 10 ** DEFAULT_DECIMALS_COUNT;
const TOKEN_TRANSFER_AMOUNT_BUFFER = Buffer.from(
  Uint8Array.of(...new BN(TOKEN_TRANSFER_AMOUNT).toArray("le", 8))
);

(async () => {
  const connection = new Connection(clusterApiUrl("devnet"), "confirmed");
  const programId = new PublicKey(
    "EfYK91eN3AqTwY1C34W6a33qGAtQ8HJYVhNv7cV4uMZj"
  );

  const mintDataSpace = MintLayout.span;
  const mintRentRequired = await connection.getMinimumBalanceForRentExemption(
    mintDataSpace
  );

  const tokenDataSpace = AccountLayout.span;
  const tokenRentRequired = await connection.getMinimumBalanceForRentExemption(
    tokenDataSpace
  );

  // Airdropping some SOL
  await connection.confirmTransaction(
    await connection.requestAirdrop(PAYER_KEYPAIR.publicKey, LAMPORTS_PER_SOL)
  );

  // Allocating space and rent for mint account
  const createMintAccountIx = SystemProgram.createAccount({
    fromPubkey: PAYER_KEYPAIR.publicKey,
    lamports: mintRentRequired,
    newAccountPubkey: TOKEN_MINT_ACCOUNT.publicKey,
    programId: TOKEN_PROGRAM_ID,
    space: mintDataSpace,
  });

  // Initializing mint with decimals and authority
  const initializeMintIx = Token.createInitMintInstruction(
    TOKEN_PROGRAM_ID,
    TOKEN_MINT_ACCOUNT.publicKey,
    DEFAULT_DECIMALS_COUNT,
    PAYER_KEYPAIR.publicKey, // mintAuthority
    PAYER_KEYPAIR.publicKey // freezeAuthority
  );

  // Allocating space and rent for source token account
  const createSourceTokenAccountIx = SystemProgram.createAccount({
    fromPubkey: PAYER_KEYPAIR.publicKey,
    newAccountPubkey: SOURCE_TOKEN_ACCOUNT.publicKey,
    lamports: tokenRentRequired,
    programId: TOKEN_PROGRAM_ID,
    space: tokenDataSpace,
  });

  // Initializing token account with mint and owner
  const initializeSourceTokenAccountIx = Token.createInitAccountInstruction(
    TOKEN_PROGRAM_ID,
    TOKEN_MINT_ACCOUNT.publicKey,
    SOURCE_TOKEN_ACCOUNT.publicKey,
    PAYER_KEYPAIR.publicKey
  );

  // Minting tokens to the source token account for transferring later to destination account
  const mintTokensIx = Token.createMintToInstruction(
    TOKEN_PROGRAM_ID,
    TOKEN_MINT_ACCOUNT.publicKey,
    SOURCE_TOKEN_ACCOUNT.publicKey,
    PAYER_KEYPAIR.publicKey,
    [PAYER_KEYPAIR],
    TOKEN_TRANSFER_AMOUNT
  );

  // Allocating space and rent for destination token account
  const createDestinationTokenAccountIx = SystemProgram.createAccount({
    fromPubkey: PAYER_KEYPAIR.publicKey,
    newAccountPubkey: DESTINATION_TOKEN_ACCOUNT.publicKey,
    lamports: tokenRentRequired,
    programId: TOKEN_PROGRAM_ID,
    space: tokenDataSpace,
  });

  // Initializing token account with mint and owner
  const initializeDestinationTokenAccountIx =
    Token.createInitAccountInstruction(
      TOKEN_PROGRAM_ID,
      TOKEN_MINT_ACCOUNT.publicKey,
      DESTINATION_TOKEN_ACCOUNT.publicKey,
      RECEIVER_PUBKEY
    );

  // Our program's CPI instruction (transfer)
  const transferTokensIx = new TransactionInstruction({
    programId: programId,
    data: TOKEN_TRANSFER_AMOUNT_BUFFER,
    keys: [
      {
        isSigner: false,
        isWritable: true,
        pubkey: SOURCE_TOKEN_ACCOUNT.publicKey,
      },
      {
        isSigner: false,
        isWritable: true,
        pubkey: DESTINATION_TOKEN_ACCOUNT.publicKey,
      },
      {
        isSigner: true,
        isWritable: true,
        pubkey: PAYER_KEYPAIR.publicKey,
      },
      {
        isSigner: false,
        isWritable: false,
        pubkey: TOKEN_PROGRAM_ID,
      },
    ],
  });

  const transaction = new Transaction();
  // Adding up all the above instructions
  transaction.add(
    createMintAccountIx,
    initializeMintIx,
    createSourceTokenAccountIx,
    initializeSourceTokenAccountIx,
    mintTokensIx,
    createDestinationTokenAccountIx,
    initializeDestinationTokenAccountIx,
    transferTokensIx
  );

  const txHash = await connection.sendTransaction(transaction, [
    PAYER_KEYPAIR,
    TOKEN_MINT_ACCOUNT,
    SOURCE_TOKEN_ACCOUNT,
    DESTINATION_TOKEN_ACCOUNT,
  ]);

  console.log(`Token transfer CPI success: ${txHash}`);
})();

ตอนนี้เรามาลองดูตัวอย่างอื่นกันบ้าง นั่นก็คือ instruction ของ System Program's create_account ซึ่งจะมีข้อแตกต่างกันอยู่บ้างเล๊กน้อย เราจะไม่ได้ส่ง token_program ไปเป็นหนึ่งใน accounts ใน function invoke อย่างไรก็ตามมันจะมีข้อยกเว้นอยู่ บ้างที่เราจะต้องส่ง invoking instruction's program_id ในกรณีของเราก็คือ program_id ของ System Program's ("11111111111111111111111111111111") ทำให้ accounts ที่ต้องการตอนนี้คือ

  1. payer account ซึ่งก็คือคนจ่ายค่า rent
  2. account ที่จะสร้างขึ้นมาใหม่
  3. System Program account
Press </> button to view full source
use solana_program::{
    account_info::{next_account_info, AccountInfo},
    entrypoint,
    entrypoint::ProgramResult,
    msg,
    program::invoke,
    program_error::ProgramError,
    pubkey::Pubkey,
    rent::Rent,
    system_instruction::create_account,
    sysvar::Sysvar,
};

entrypoint!(process_instruction);

// Accounts required
/// 1. [signer, writable] Payer Account
/// 2. [signer, writable] General State Account
/// 3. [] System Program
pub fn process_instruction(
    program_id: &Pubkey,
    accounts: &[AccountInfo],
    instruction_data: &[u8],
) -> ProgramResult {
    let accounts_iter = &mut accounts.iter();

    // Accounts required for token transfer

    // 1. Payer account for the state account creation
    let payer_account = next_account_info(accounts_iter)?;
    // 2. Token account we hold
    let general_state_account = next_account_info(accounts_iter)?;
    // 3. System Program
    let system_program = next_account_info(accounts_iter)?;

    msg!(
        "Creating account for {}",
        general_state_account.key.to_string()
    );

    // Parsing the token transfer amount from instruction data
    // a. Getting the 0th to 8th index of the u8 byte array
    // b. Converting the obtained non zero u8 to a proper u8 (as little endian integers)
    // c. Converting the little endian integers to a u64 number
    let account_span = instruction_data
        .get(..8)
        .and_then(|slice| slice.try_into().ok())
        .map(u64::from_le_bytes)
        .ok_or(ProgramError::InvalidAccountData)?;

    let lamports_required = (Rent::get()?).minimum_balance(account_span as usize);

    // Creating a new TransactionInstruction
    /*
        Internal representation of the instruction's return value (Instruction)

        Instruction::new_with_bincode(
            system_program::id(), // NOT PASSED FROM USER
            &SystemInstruction::CreateAccount {
                lamports,
                space,
                owner: *owner,
            },
            account_metas,
        )
    */

    let create_account_instruction = create_account(
        &payer_account.key,
        &general_state_account.key,
        lamports_required,
        account_span,
        program_id,
    );

    let required_accounts_for_create = [
        payer_account.clone(),
        general_state_account.clone(),
        system_program.clone(),
    ];

    // Passing the TransactionInstruction to send (with the issused program_id)
    invoke(&create_account_instruction, &required_accounts_for_create)?;

    msg!("Transfer successful");

    Ok(())
}

ฝั่ง client จะมี code ดังนี้

Press </> button to view full source
import { clusterApiUrl, Connection, Keypair } from "@solana/web3.js";
import { LAMPORTS_PER_SOL, PublicKey, SystemProgram } from "@solana/web3.js";
import { Transaction, TransactionInstruction } from "@solana/web3.js";

import * as BN from "bn.js";

// Users
const PAYER_KEYPAIR = Keypair.generate();
const GENERAL_STATE_KEYPAIR = Keypair.generate();

const ACCOUNT_SPACE_BUFFER = Buffer.from(
  Uint8Array.of(...new BN(100).toArray("le", 8))
);

(async () => {
  const connection = new Connection(clusterApiUrl("devnet"), "confirmed");
  const programId = new PublicKey(
    "DkuQ5wsndkzXfgqDB6Lgf4sDjBi4gkLSak1dM5Mn2RuQ"
  );

  // Airdropping some SOL
  await connection.confirmTransaction(
    await connection.requestAirdrop(PAYER_KEYPAIR.publicKey, LAMPORTS_PER_SOL)
  );

  // Our program's CPI instruction (create_account)
  const createAccountIx = new TransactionInstruction({
    programId: programId,
    data: ACCOUNT_SPACE_BUFFER,
    keys: [
      {
        isSigner: true,
        isWritable: true,
        pubkey: PAYER_KEYPAIR.publicKey,
      },
      {
        isSigner: true,
        isWritable: true,
        pubkey: GENERAL_STATE_KEYPAIR.publicKey,
      },
      {
        isSigner: false,
        isWritable: false,
        pubkey: SystemProgram.programId,
      },
    ],
  });

  const transaction = new Transaction();
  // Adding up all the above instructions
  transaction.add(createAccountIx);

  const txHash = await connection.sendTransaction(transaction, [
    PAYER_KEYPAIR,
    GENERAL_STATE_KEYPAIR,
  ]);

  console.log(`Create Account CPI Success: ${txHash}`);
})();

วิธีสร้าง PDA

Program Derived Address คือ account ที่มี program เป็นเจ้าของแต่จะไม่มี private key แต่จะใช้ signature ที่ได้จาก seeds และ bump (a nonce ที่ทำให้ตก curve). การ "Generating" Program Address จะแตกต่างจากการ "creating" เราสามารถสร้าง (generate) PDA โดยใช้ Pubkey::find_program_address การทำ PDA ปกติจะ initialize address ด้วย space และชุดของ state เข้าไป

Keypair account ทั่วไปจะสามารถสร้างภายนอก program และส่งเข้ามาเพื่อ initialize state ของมัน. แต่สำหรับ PDAs, จะสร้างบน chain, เนื่องจากมันไม่สามารถ sign เพื่อเป็นตัวแทนของตัวเองได้. ดังนั้นเราจะใช้ invoke_signed เพื่อส่ง seeds ของ PDA และตามไปด้วย signature ของ funding account เพื่อให้เกิดการสร้าง PDA ขึ้น

Press </> button to view full source
use borsh::{BorshDeserialize, BorshSerialize};
use solana_program::{
    account_info::{next_account_info, AccountInfo},
    entrypoint,
    entrypoint::ProgramResult,
    program::invoke_signed,
    program_error::ProgramError,
    pubkey::Pubkey,
    rent::Rent,
    system_instruction,
    sysvar::Sysvar,
};

entrypoint!(process_instruction);

#[derive(BorshSerialize, BorshDeserialize, Debug)]
pub struct HelloState {
    is_initialized: bool,
}

// Accounts required
/// 1. [signer, writable] Funding account
/// 2. [writable] PDA account
/// 3. [] System Program
pub fn process_instruction(
    program_id: &Pubkey,
    accounts: &[AccountInfo],
    instruction_data: &[u8],
) -> ProgramResult {
    const ACCOUNT_DATA_LEN: usize = 1;

    let accounts_iter = &mut accounts.iter();
    // Getting required accounts
    let funding_account = next_account_info(accounts_iter)?;
    let pda_account = next_account_info(accounts_iter)?;
    let system_program = next_account_info(accounts_iter)?;

    // Getting PDA Bump from instruction data
    let (pda_bump, _) = instruction_data
        .split_first()
        .ok_or(ProgramError::InvalidInstructionData)?;

    // Checking if passed PDA and expected PDA are equal
    let signers_seeds: &[&[u8]; 3] = &[
        b"customaddress",
        &funding_account.key.to_bytes(),
        &[*pda_bump],
    ];
    let pda = Pubkey::create_program_address(signers_seeds, program_id)?;

    if pda.ne(&pda_account.key) {
        return Err(ProgramError::InvalidAccountData);
    }

    // Assessing required lamports and creating transaction instruction
    let lamports_required = Rent::get()?.minimum_balance(ACCOUNT_DATA_LEN);
    let create_pda_account_ix = system_instruction::create_account(
        &funding_account.key,
        &pda_account.key,
        lamports_required,
        ACCOUNT_DATA_LEN.try_into().unwrap(),
        &program_id,
    );
    // Invoking the instruction but with PDAs as additional signer
    invoke_signed(
        &create_pda_account_ix,
        &[
            funding_account.clone(),
            pda_account.clone(),
            system_program.clone(),
        ],
        &[signers_seeds],
    )?;

    // Setting state for PDA
    let mut pda_account_state = HelloState::try_from_slice(&pda_account.data.borrow())?;
    pda_account_state.is_initialized = true;
    pda_account_state.serialize(&mut &mut pda_account.data.borrow_mut()[..])?;

    Ok(())
}

เราสามารถส่ง accounts ที่ต้องใช้ผ่าน client ได้ตามนี้

Press </> button to view full source
import {
  clusterApiUrl,
  Connection,
  Keypair,
  LAMPORTS_PER_SOL,
  PublicKey,
  SystemProgram,
  Transaction,
  TransactionInstruction,
} from "@solana/web3.js";

const PAYER_KEYPAIR = Keypair.generate();

(async () => {
  const connection = new Connection(clusterApiUrl("devnet"), "confirmed");
  const programId = new PublicKey(
    "6eW5nnSosr2LpkUGCdznsjRGDhVb26tLmiM1P8RV1QQp"
  );

  // Airdop to Payer
  await connection.confirmTransaction(
    await connection.requestAirdrop(PAYER_KEYPAIR.publicKey, LAMPORTS_PER_SOL)
  );

  const [pda, bump] = await PublicKey.findProgramAddress(
    [Buffer.from("customaddress"), PAYER_KEYPAIR.publicKey.toBuffer()],
    programId
  );

  console.log(`PDA Pubkey: ${pda.toString()}`);

  const createPDAIx = new TransactionInstruction({
    programId: programId,
    data: Buffer.from(Uint8Array.of(bump)),
    keys: [
      {
        isSigner: true,
        isWritable: true,
        pubkey: PAYER_KEYPAIR.publicKey,
      },
      {
        isSigner: false,
        isWritable: true,
        pubkey: pda,
      },
      {
        isSigner: false,
        isWritable: false,
        pubkey: SystemProgram.programId,
      },
    ],
  });

  const transaction = new Transaction();
  transaction.add(createPDAIx);

  const txHash = await connection.sendTransaction(transaction, [PAYER_KEYPAIR]);
  console.log(`Created PDA successfully. Tx Hash: ${txHash}`);
})();

วิธีอ่าน accounts

ทุกๆ instructions ใน Solana จะต้องการอย่างน้อย 2 - 3 accounts, และ และมันต้องถูกเรียกใช้บน instruction handlersตามลำดับของ accounts. ซึ่งจะง่ายกว่าถ้าเราใช้ iter() method ใน Rust, แทนที่จะเรียงลำดับ accounts เอง สำหรับ method next_account_info จะ slices index แรกของลำดับ และคืนค่า account ใน array ออกมา. ลองดูตัวอย่าง instruction ง่ายๆ ที่จะแสดง accounts และ parse มันออกมา

Press </> button to view full source
use borsh::{BorshDeserialize, BorshSerialize};
use solana_program::{
    account_info::{next_account_info, AccountInfo},
    entrypoint,
    entrypoint::ProgramResult,
    pubkey::Pubkey,
};

entrypoint!(process_instruction);

#[derive(BorshSerialize, BorshDeserialize, Debug)]
pub struct HelloState {
    is_initialized: bool,
}

// Accounts required
/// 1. [signer] Payer
/// 2. [writable] Hello state account
/// 3. [] Rent account
/// 4. [] System Program
pub fn process_instruction(
    _program_id: &Pubkey,
    accounts: &[AccountInfo],
    _instruction_data: &[u8],
) -> ProgramResult {
    // Fetching all the accounts as a iterator (facilitating for loops and iterations)
    let accounts_iter = &mut accounts.iter();
    // Payer account
    let payer_account = next_account_info(accounts_iter)?;
    // Hello state account
    let hello_state_account = next_account_info(accounts_iter)?;
    // Rent account
    let rent_account = next_account_info(accounts_iter)?;
    // System Program
    let system_program = next_account_info(accounts_iter)?;

    Ok(())
}

วิธีตรวจสอบ accounts

เนื่องจาก programs ใน Solana เป็นแบบ stateless เราต้องแน่ใจว่า accounts ที่ส่งไป ได้รับการตรวจสอบมากที่สุดเท่าที่จะเป็นไปได้เพื่อลดการโจมตี การตรวจสอบเบื้องต้นที่ทำได้คือ

  1. ตรวจว่า expected signer account ที่คาดไว้ได้ signed แล้วจริงๆ
  2. ตรวจว่า expected state account's อยู่ในสถานะ writable
  3. ตรวจว่า expected state account's owner คือ program id ที่เรียกมา
  4. ถ้า initializing state เป็นครั้งแรกก็ให้ตรวจสอบว่า account ได้ initialized ไปรึยัง
  5. ตรวจว่า cross program ids ถูกส่งมาด้วย (เมื่อต้องการ) เป็นไปตาม expected.

ต่อไปคือ instruction เบื้องต้นที่ทำการ initializes hero state account,แต่เนื่องจากเราต้องทำการตรวจสอบด้วยจึงต้องเขียนตามนี้

Press </> button to view full source
use borsh::{BorshDeserialize, BorshSerialize};
use solana_program::{
    account_info::{next_account_info, AccountInfo},
    clock::Clock,
    entrypoint,
    entrypoint::ProgramResult,
    msg,
    program_error::ProgramError,
    pubkey::Pubkey,
    rent::Rent,
    system_program::ID as SYSTEM_PROGRAM_ID,
    sysvar::Sysvar,
};

entrypoint!(process_instruction);

#[derive(BorshSerialize, BorshDeserialize, Debug)]
pub struct HelloState {
    is_initialized: bool,
}

// Accounts required
/// 1. [signer] Payer
/// 2. [writable] Hello state account
/// 3. [] System Program
pub fn process_instruction(
    program_id: &Pubkey,
    accounts: &[AccountInfo],
    _instruction_data: &[u8],
) -> ProgramResult {
    let accounts_iter = &mut accounts.iter();
    // Payer account
    let payer_account = next_account_info(accounts_iter)?;
    // Hello state account
    let hello_state_account = next_account_info(accounts_iter)?;
    // System Program
    let system_program = next_account_info(accounts_iter)?;

    let rent = Rent::get()?;

    // Checking if payer account is the signer
    if !payer_account.is_signer {
        return Err(ProgramError::MissingRequiredSignature);
    }

    // Checking if hello state account is rent exempt
    if !rent.is_exempt(hello_state_account.lamports(), 1) {
        return Err(ProgramError::AccountNotRentExempt);
    }

    // Checking if hello state account is writable
    if !hello_state_account.is_writable {
        return Err(ProgramError::InvalidAccountData);
    }

    // Checking if hello state account's owner is the current program
    if hello_state_account.owner.ne(&program_id) {
        return Err(ProgramError::IllegalOwner);
    }

    // Checking if the system program is valid
    if system_program.key.ne(&SYSTEM_PROGRAM_ID) {
        return Err(ProgramError::IncorrectProgramId);
    }

    let mut hello_state = HelloState::try_from_slice(&hello_state_account.data.borrow())?;

    // Checking if the state has already been initialized
    if hello_state.is_initialized {
        return Err(ProgramError::AccountAlreadyInitialized);
    }

    hello_state.is_initialized = true;
    hello_state.serialize(&mut &mut hello_state_account.data.borrow_mut()[..])?;
    msg!("Account initialized :)");

    Ok(())
}

วิธีอ่าน instructions หลายๆ ตัวจาก transaction

Solana ดูทุก instructions ใน transaction ปัจจุบัน เราสามารถเก็บมันไว้ใน variable และทำงานตามลำดับ (iterate) ได้ เราสามารถอะไรได้หลายอย่างจากจุดนี้ เช่นหา transactions ที่น่าสงสัย

Press </> button to view full source
use anchor_lang::{
    prelude::*,
    solana_program::{
        sysvar,
        serialize_utils::{read_pubkey,read_u16}
    }
};


declare_id!("8DJXJRV8DBFjJDYyU9cTHBVK1F1CTCi6JUBDVfyBxqsT");

#[program]
pub mod cookbook {
    use super::*;

    pub fn read_multiple_instruction<'info>(ctx: Context<ReadMultipleInstruction>, creator_bump: u8) -> Result<()> {
        let instruction_sysvar_account = &ctx.accounts.instruction_sysvar_account;

        let instruction_sysvar_account_info = instruction_sysvar_account.to_account_info();

        let id = "8DJXJRV8DBFjJDYyU9cTHBVK1F1CTCi6JUBDVfyBxqsT";

        let instruction_sysvar = instruction_sysvar_account_info.data.borrow();

        let mut idx = 0;

        let num_instructions = read_u16(&mut idx, &instruction_sysvar)
        .map_err(|_| MyError::NoInstructionFound)?;

        for index in 0..num_instructions {
            let mut current = 2 + (index * 2) as usize;
            let start = read_u16(&mut current, &instruction_sysvar).unwrap();

            current = start as usize;
            let num_accounts = read_u16(&mut current, &instruction_sysvar).unwrap();
            current += (num_accounts as usize) * (1 + 32);
            let program_id = read_pubkey(&mut current, &instruction_sysvar).unwrap();

            if program_id != id
            {
                msg!("Transaction had ix with program id {}", program_id);
                return Err(MyError::SuspiciousTransaction.into());
            }
        }

        Ok(())
    }

}

#[derive(Accounts)]
#[instruction(creator_bump:u8)]
pub struct ReadMultipleInstruction<'info> {
    #[account(address = sysvar::instructions::id())]
    instruction_sysvar_account: UncheckedAccount<'info>
}

#[error_code]
pub enum MyError {
    #[msg("No instructions found")]
    NoInstructionFound,
    #[msg("Suspicious transaction detected")]
    SuspiciousTransaction
}
Last Updated:
Contributors: Todsaporn Banjerdkit